ETI POWER MAX

ETI POWER MAX PROGRESSIVE SYSTEM

The ETI Power Max delivers lubricant with a progressive piston movement. Every piston controls the following one in a sequence obtained through a single delivery flow.

The ETI Power Max systems have proven to be right solution for many industries and applications, eliminating costly downtime. Examples include :

Mobile Equipment:

  • Excavators
  • Wheel Loaders
  • Haulers
  • Motor Graders
  • Off road Tractors
  • Trucks of all types
  • Multiple Axle trailers
  • Hydraulic Hammers
  • Street Sweepers
  • Buses
  • Etc

 

Industrial Equipment:

  • Cement plant
  • Dewatering
  • Handling equipment
  • Wood processing
  • Wind Energy
  • Turbine
  • Printing & Packaging
  • Metal working
  • Beverage industry
  • Plastic processing
  • Paper plant
  • Food/Bakery
  • Lathes
  • Textile
  • Etc

 

 

Grease pump capacity: 3, 5, 7, 9 and 12Kg.  ETI  Power Max Grease body is  made of Carbon Steel S45C.

Resistant to: Impact, UV and Vibration during operation.

Benefits:

  • Positive delivery of a measured quantity of lubricant guaranteed
  • Long operational life assured by a careful selection of high grade material and strict quality control
  • System design flexibility due to large range and combination of sizes
  • Suitable for system functioning control
  • Operation monitor with indicators and/or contact plugs

 

 

 

Data Sheet

Reservoir Capacity 3 – 5 – 7 – 9 – 12 Kg
Pump Power Supply 12/24 VDC – 220/380 VAC
Operating pressure Maximum 4000Psi (300BAR)
Operating temperature -20°C a + 100°C
Pump Elements number 1 to 3
Pump element displacement ( Ø 6mm ) 2,5 cm³
( Ø 6mm ) 5,0 cm³
Lubricants Type Grease NLGI-00 up to NLGI-2
Control elements Visual and electric for signaling cycle and overpressure
Enclosure Rating IP67. (Protected from water sprayed in all directions)
Pause time adjusting 1 minute – 90 Hours
Run time adjusting 1 minute – 90 Minutes
Warnings Broken fuse, Fault, Alarm/Buzzer
Divider number 6 to 12 Output
Discharge/Stroke for each outlet of Divider 45mm³ – 105mm³ – 140mm³
Body Distributor / Divider Carbon Steel S45C
Distributor Inlet 1/8″ BSP – Female
Distributor Outlets M10 x 1 – Female
Main distribution line Hose  Ø 8mm
Secondary distribution line Hose  Ø 6-8mm